Facebook Avatar Creation: A How-To Guide

Facebook Avatar Creation: A How-To Guide 

Steps: How to CONNECT a FB account

Day 0 – Connecting of account/s

  1. Buy blank Facebook accounts from a trusted supplier. 

  2. Connect the FB accounts on Jarvee 


 

  1. Go to Facebook and click add profiles

 

  1. Follow the steps in the picture in order to put a label on the account.

 

  • Format for the username and password is like this username:password

 

  1. To proceed scroll down and add the USERNAME, PASSWORD and set the setting 

 

  1. To set the settings, follow the instructions on the picture

 

 

  1. Go back to the top of the page

  1. Click Proxy Manager to add the accounts’ Proxy

 

  1. Time to add the Proxy

 

  1. Make sure to follow the numbering in order to add the Proxy.

 

  1. The proxy has been added. As you can see its still pending so you have to make it a valid one

 

  1. To make the Proxy valid, go back to Social Profiles

IMPORTANT NOTE: IT IS RECOMMENDED TO CONNECT ONE AVATAR TO ONLY ONE PROXY.

In layman’s terms, proxies are protectors of your accounts from being flagged or disabled. It serves as a mask of your real IP address and acts as a unique IP address of your accounts (as we all know, having too many accounts connected to a single IP address is flagged as a suspicious activity. Hence, running your accounts without a proxy or a reliable one is a very dangerous step in starting automation.

 

  1. Once you reached the social profile page look for the account that you connect (LOOK FOR ITS NAME)

  1. After clicking, scroll down a bit and go to this part and follow the instruction on the picture

 

  1. Once you click VERIFY ACCOUNT, wait for a few seconds and the account will be valid.

 

That’s how you connect a FB account through Jarvee.

Steps: How to do WARM UP with a FACEBOOK avatar

Day 1- Adding of Email and Phone Number

 

  1. To start, open the account that you connected by clicking it.

  2. Next, click BROWSE/BROWSE EMBEDDED to open the account

 

  1. Once you already open the account, go to settings

 

 

  1. To add the email address and the phone number follow the steps below:

 

 

  1. After you input the email address click ADD

 

 

 

  1. After adding the Email address, it should be verified.

  2. To verify the email address follow the steps below:

 

  1. Input gmx.com on the box then wait for it to load. It will direct you to the gmx home page.

 

  1. Put/paste the email address and password to verify

 

 

  1. Click the verification message to get the code.

 

  1. Click the confirm button and wait for it to be verified.

  1. Email verified.

Adding of Phone number

  1. To start, go to settings 

 

  1. Follow the instruction on the attached photo

 

  1. Add the number then click continue to proceed

 

 

  1. After you click continue, your phone number now is verified.

Day 2 – Adding of Profile Picture

1. Go to the accounts’ profile

 

2. To change/add the profile picture follow the instruction below

 

Day 3 – Adding of Cover Photo (see attached photo for instruction on how to add your Cover Photo)


Day 4 – Editing of bio and adding other details

 

  1. To edit all the basic information for the account follow the instructions below:

 

Day 5 – Like related pages (3 to 5 pages)

 

  1. Search for pages to the search box and like it’s page

 

Day 6- Join to related groups (at least 3 groups)

  1. To join groups click and open group page on facebook

 

2. Search for related groups

 

 

Day 7 – Adding of friends

 

  1. Add friends by searching their names on the search box.

 

Day 8 and so on – Random Actions

 

It is essential also to do RANDOM ACTIONS for the accounts and these include – LIKING PAGES, JOINING GROUPS and  TALKING TO PEOPLE.

If you follow all of the instructions given you’ll surely build a great Facebook account with no sweat!!

LinkedIn Avatar Creation: A How-To Guide

LinkedIn Avatar Creation: A How-To Guide 

 

Steps: How to CONNECT LinkedIn account

Day 0: Connecting the account/s

  • Buy gmx mail from a trusted supplier (to make the account from scratch)

  • Start connecting it to Jarvee and follow the steps below 

  • Go to SOCIAL PROFILES

 

  • The click ADD PROFILES


 

  • You will be directed to this page then click ADD PROFILE (make sure that you’re adding profile under LinkedIn)

 

 

  • It will look like this once you click Add Profile under LinkedIn


 

  • Next is to change the account name, you have to input the account name in the box (see photo)

[For the accounts’ name you can search names on google or you can made up your own names for your accounts]

 

 

  • Then input the credentials in the description box


 

  • Input the USERNAME and PASSWORD

(There are also cases that the username is an email address)

 

[Username and password are the email address and its password]

[As you can see in the example the username is melanikova.94@gmx.us and the password is this JXP2C0A305s8Qu]

[ When you buy gmx mail the email address is the username and the following text is the password]

FORMAT: Username/Email Address:Password:

  : melanikova.94@gmx.us:JXP2C0A305s8Qu:Nataliya:Melanikova

 

  • Next, choose a tag for your account (See photo)

 

  • Click the box to reveal the settings below and do the setup for the accounts’ settings (See photo and follow the instructions)

 

  • Follow the instructions in the photo. Do it carefully

  • Tick the box (make sure it has a check)

  • Then, input the STANDARD TEXT on the box which is [CUSTOM_AGENT]=First name of the account


The example shows [CUSTOM_AGENT]=Anne

 

  • Scroll down a little bit for the continuation.

  • Copy paste the TEXT which is this [CUSTOM_AGENT]=First name of the account, then paste it again in the box (See photo)


  • After that, scroll up and go to PROXY MANAGER

 

 

  • Time to add the PROXY

  • Check first if the PROXY is valid (See photo)


 

  • Make sure to follow the numbering in order to add the Proxy.


 

  • The proxy has been added. As you can see it’s still pending so you have to make it a valid one.


 

  • You need to go back to SOCIAL PROFILE to make the account valid

 

 

IMPORTANT NOTE: IT IS RECOMMENDED TO CONNECT ONE AVATAR TO ONLY ONE PROXY.

In layman’s terms, proxies are protectors of your accounts from being flagged or disabled. It serves as a mask of your real IP address and acts as a unique IP address of your accounts (as we all know, having too many accounts connected to a single IP address is flagged as a suspicious activity. Hence, running your accounts without a proxy or a reliable one is a very dangerous step in starting automation.

  • Once you reached the social profile page look for the account that you connect (LOOK FOR ITS NAME) Then click it.

 

.

  • Click BROWSE EMBEDDED


 

  • So you will be directed here


 

  • Next is to check if the EMAIL ADDRESS (it’s in the description box) is running or active

  • You need to go to google first (See photo)


 

 

  • Next go to gmx.com


 

 

NOTE: After clicking gmx.com (refer to the photo above) if there are ADS on screen before you will reach the man page of gmx just press X or find the X/Cancel button


 

  • Input in the box the EMAIL ADDRESS (the one used as username) and it’s PASSWORD

 

 

  • You will be directed to this page after clicking LOG IN


This is an indication that the Email Address is active or running

[It is important to check if the email address is active so that you can use it in building your linkedin account. Once the email address that you’re using in building your account is blocked or not active you cannot use it and you cannot access the Linkedin account as well]

 

  • Next step, go to LinkedIn page to register

  • You have to go back again to google

 

  • Type linkedin.com in the search box


 

 

  • If you’re already in this page, click SIGN IN

 

  • After that, place the first name, last name, email address, username as well as the Password for signing in, then click AGREE and JOIN

 

 

  • Once you already click AGREE and JOIN, you will proceed to this page


There are tendencies that you will do CAPTCHA or something like this. Try to answer/solve in order to get the security verification

 

  • You will be directed again to this page and click OPEN LINKEDIN (See photo)

 

 

  • Now let’s verify the email address. To verify, you need to click REQUEST A NEW CONFIRMATION LINK (See photo) to request a confirmation.

 

 

  • It will look like this after you request for a confirmation link

 

  • Next, you will go back to GMX.COM for you to confirm the email address being used. 

  • Click NEW TAB (See photo)

 

  • Then, type GMX.COM in the search box


 

  • Click LOG in, then input the EMAIL ADDRESS and PASSWORD then proceed


  • Click the message to open 


  • To confirm the email address, follow the instruction below (See photo)


  • When you’re already in this page, you need to wait for a couple of seconds


  • Now it’s already VERIFIED. Follow the instructions below for the continuation


 


  • For the next step, you need to make the account VALID (because it’s still on a pending status). To do that, you need to click VERIFY ACCOUNT and BROWSE EMBEDDED simultaneously ( click first VERIFY ACCOUNT then click immediately BROWSE EMBEDDED).

 

  • Click SIGN IN to proceed

 


  • Then, click FILL LOGIN and wait for the boxes to be filled. (It will be filled automatically)


 

  • Then that’s it. The account is already good and as you can see it is valid 

 

IMPORTANT NOTE: After you connect the account to the server, you need to make it rest for 24hrs.


Steps: How to WARM UP an account on LINKEDIN

 

Day 1 – Adding of Profile Photo

 

  • First is to click BROWSE EMBEDDED, to open the profile

 

 

  • Next, go to your computer and go to the folder where you saved your assigned profile picture to your account and RENAME it. (To avoid confusions and repeating of using photo)


[We recommend https://thispersondoesnotexist.com/ in getting random photos for your LinkedIn avatars]

 

 

Additional Info

  • You need to HASH first every photo before you use it. Use the tool HASH MANAGER. Follow the instructions below on how to hash a photo


[You need to download from Google the Hash Manager app. In case you’ll find it hard downloading it, you can contact us at andrea@thesocialproxy.com if you wish to have a copy of the application]

 

 

 

 NOTE: It is important to change the MD5 hash value as each file in the Internet has its own hash and since we just downloaded the picture from a website, others might have uploaded it already. Some sites do not allow the same files (same hash) to be uploaded more than once. Hence, we need to change the hash in the first place.


  • Go back to the profile and click the camera icon


 

  • Follow the instructions below:


 

 

  • Then select the photo


 

  • Then upload the photo


 

  • Now you have your accounts’ profile photo



Day 2 – Adding of Number

 

  • Start by clicking BROWSE EMBEDDED to open the account

 

 

  • Next step is to open settings to change the phone number


  • Go to Settings and Privacy


 

  • Go to Sign in and Security


  • Click Phone number

  • Then click ADD PHONE NUMBER


 

  • Select your country and add the phone number


 

  • After you input the phone number, you need to get the code for verification

  • Click SEND CODE


  • Input the PASSWORD of the ACCOUNT then click DONE

  • If you have the code, type it in the box and click verify


 

Then the number will successfully be added

Day 3 – Adding of connections and joining groups

 

Adding Connections

 

  • To start, open the account by clicking BROWSE EMBEDDED


 

  • Go to the search box and search for connections


[Search and send connection requests to people in the same niche as the account]

 

 

  • Then, click connect to send connections


Adding groups

 

  • Search a keyword (make sure that you will click groups)


 

Example (It should be in GROUPS)

  • You can select groups then click the name to join


 

  • Then send request to join



Day 4 – Following pages and hashtags

 

Following pages

 

  • You can search company pages in the search box or you can find pages on your feed as well. (See photo)


 

Adding Hashtags

 

  • You can search hashtags too on the search box 


 

  • Then, you can browse on to some articles and click see more to open the article and look for hashtags

  • Then click the hashtags

  • Then click FOLLOW

Editing the profile information

  • Start with work experience (title and job)

 

 

 

  • Next is education


  • Fill in all the information needed then click SAVE

 

  • For the location, click this icon 


 

 

  • You can also add summary to your account


  • Write your summary here then click save once finished.


After that you have to do RANDOM ACTIONS such as, more following of pages, joining more groups, sending more connection requests to people in the same niche as the account, starting conversations with people and posting on the wall.

 

LinkedIn is the ultimate social network for business professionals who want to make connections, remain connected with others in their industry, and continue to grow in their chosen fields. Having a LinkedIn avatar is a perfect way to expand your professional network.

 

This guide will walk you through everything you need to know to get started, including how to build a fantastic profile, make the right connections, use the platform effectively, and make your account stand out from the rest.


Instagram Avatar Creation: A How-To Guide

Instagram Avatar Creation: A How-To Guide 

 

Steps: How to CONNECT an IG account

 

Day 0: Connecting the account/s

 

  • Buy Instagram accounts from a trusted supplier.

  • Connect the IG accounts on Jarvee.

 

 

 

  • Make sure that you’re under Instagram when you add an account.

 

  • Format for the username and password is like this username:password 

 

 

  • After ticking the box you have to scroll down to see the settings

 

 

  • Then scroll down again after.

 

 

 

  • When you proceed to the proxy manager to add a proxy make sure that you select a VALID PROXY 

 


IMPORTANT NOTE: IT IS RECOMMENDED TO CONNECT ONE AVATAR TO ONLY ONE PROXY

In layman’s terms, proxies are protectors of your accounts from being flagged or disabled. It serves as a mask of your real IP address and acts as a unique IP address of your accounts (as we all know, having too many accounts connected to a single IP address is flagged as a suspicious activity. Hence, running your accounts without a proxy or a reliable one is a very dangerous step in starting automation. 

 

  • Once you followed the steps, it will appear like this

 

 

  • When you reach the SOCIAL PROFILES just scroll down or look for the account that you added. Mind that it has a PENDING status. [ Usually it is located at the bottom part ]

 

 

 

 

 

  • After you click VERIFY ACCOUNT the status will turn to INITIALIZING. The status should be VALID, you can still connect another account while waiting for it to be valid.

Avatar Creation: A How-To Guide 

 

Steps: How to WARM UP an IG account

 

Day 1: ADDING EMAIL ADDRESS 

 

 

  • Click the accounts’ name

 

 

 

  • Wait for it to load

 

  • Once you’re in the accounts’ profile, click EDIT PROFILE

  • Then scroll down and find EMAIL

 

  • After you click SUBMIT, click again Profile

 

  • Then click EDIT PROFILE

  • Scroll down to the EMAIL part

  • You’ll see there a button CONFIRM EMAIL

  • Click that button so that you will be able to verify the email address

 

 

  • To verify the email address you have to go to GMX.COM

 

  • Once you’ll reach this page, click LOG IN

 

  • Input the Email and the Password

  • Then click INBOX

 

  • Look for the message containing CONFIRM YOUR EMAIL ADDRESS

 

 

  • Click confirm email address

  • Then click OK. Email has been verified!

 

Adding Phone Number

 

  • Proceed immediately to profile

 

  • Click EDIT PROFILE and scroll down to the PHONE NUMBER part 

 

  • Input the PHONE NUMBER then click SUBMIT

  • Click PROFILE 

  • Then click EDIT PROFILE

  • Scroll down and you’ll see the CONFIRM PHONE NUMBER 

  • After clicking you will be directed to the page where you can input the CODE 

  • Once you will input the code you’re account is good to go and ready for the next process

NOTE:

 

DO NOT FORGET TO PUT THE EMAIL ADDRESS WITH THE PASSWORD AND THE PHONE NUMBER ON THE DESCRIPTION BOX.

 

Day 2: ADDING OF USERNAME AND BIO

 

  • Open the account 

 

  • Click EDIT PROFILE

  • After adding the username and bio, SCROLL DOWN and click SUBMIT

  • You can exit the ACCOUNT then do the next step

 

Day 3 – Follow Actions

  • First things first, open the account by clicking browse embedded

 

  • Once the account is open or accessible follow the step below to do follow action

 

 

Steps: How to Import Scrapers in Bulk

 

  • First is you need to go to the server where you can create a sheet for importing

  • If you already open the server and you’re in the Social Profile go directly to ADD PROFILE

 

  • Once you click Add Profiles follow the instruction below in order to reveal the sheet for importing

Here’s the sheet for importing

 

  • You need to remove the written text in the sheet. How? Follow the instructions below:

  • Highlight row 2, 3 and 4

 

 

  • After which, right click and click CLEAR CONTENTS

 

Note: Buy before or after scrapers from a trusted supplier

 

  • If you already have with you your scrapers, you need to copy it .

  • After that you need to open another sheet (see photo)

Note: That sheet will be the placement of the scrapers that you copied or bought. Keep in mind that you cannot simply paste the scrapers directly into the sheet. 

 

  • You need to open a NOTEPAD first

  • PASTE the scrapers IN the NOTEPAD

  • COPY it AGAIN

  • Then PASTE it in the SHEET

So it will look like this..

 

 

 

 

  • Next, you need to follow this for the scrapers

 
  • HIGHLIGHT first the column where you paste the scrapers

 
  • Click DATA

 
  • Then CLICK SPLIT TEXT FOR THE COLUMN

 

 

 

 

  • For the SEPARATOR, you need to IDENTIFY the separator on the scrapers it self

(It could be a COLON, SEMICOLON, COMMA or etc) 

 

  • You go directly here (see photo) and click to choose for the separator

 (If you will choose for a separator you can click CUSTOM and select the right separator for the scrapers)

 

  • Next HIGHLIGHT the scrapers (username and password) then go to the sheet in the server (show demo import file).

  • Paste the scrapers in the sheet

 

  • Type the name of your scrapers

 

Note: Put also a number right before the name of your scrapers
Example: avatar scrapers 1

 

  • In order for the automatic input of the name, double click the arrow under the name of your scrapers (see photo)

 

 

  • For the next columns which are columns D E and F , those are for the proxy
    (proxy url, username, password)

  • To get the it, go back to the sheet where you paste the scrapers first 

 

  • You need to copy proxy URL, username and password (it depends on the amount of proxy you bought)

  • Go back to the sheet where you have your scrapers

 

  • After that go to the TAGS and put scraper (keep in mind that you should input SCRAPER not SCRAPERS

 

  • Next is to input the DEFAULT EMAIL VALIDATION PORT which is 993

  • Then SAVE it (CTRL S)

  • Of course you need to close the file in order for it to be usesable but before closing it totally you need to familiarize or memorize the file name

  • After that you can close the file

  • Next, you go to the server where you want to import the said scrapers and follow the instructions below:

 

 

 

  • Look for the file (usually it is located in the Quick Access)

 

  • Once you found the name, click it once and click open then wait for it to be visible

  • It will turn out like this after you open the file that you saved.

 

It’s not the end yet, we still need to set up the settings. How? Follow these steps:

 

  • Double click the name of the scraper to open 

 

  • Once you’re here in this part you need to scroll down a bit.

 

 

  • Tick the box shown in the picture to start setting up the settings

 

  • Make sure to uncheck the box shown in the picture

 

  • Make sure to see that these three has check

 

 

 

  • Check the bottom part of the settings and make sure that these boxes has no checks

 

  • For you to copy the settings from the first account to the other accounts do the following steps:

  • Click Copy Setting

 

 

  • Before anything else, click first SELECT NONE then do the steps on the picture

 

NOTE: Please be reminded that there should always be a minus 1 in your scarpers take for example: (See photo)

 

The amount of scraper being imported [here] is 100, so the number of accounts that needs settings to be set up is 99 

 

 

  • After that you click Select All

 

  • Follow the instructions on the picture

 

  • After that, click OK to finish setting up

 

  • Next step is to go back to social profiles to VERIFY the scrapers, so click SOCIAL PROFILE

 

 

  • Scroll to the right a little bit then click VERIFY to make the scrapers VALID

 

 

 

 

OR you can do the other way around

 

  • To verify the scrapers and if it’s not that a lot, click SELECT ALL

 

 

  • Then click ACTIONS ON SELECTED PROFILE

 

 

  • Scroll down a bit, look for VERIFY PROFILES, click and wait for the accounts’ status to be valid

 

 

 

How to Create Campaign and Destination List for Reposting

 

  • First things first, go to the server

  • Let’s start creating the campaign first. Click CAMPAIGN

 

  • Click ADD CAMPAIGN next 

 

 

 

  • Click ADD STANDARD CAMPAIGN

 

 

  • Name your campaign 

 

 

 

  • Next is the DESTINATION LIST

 

 

  • Then click DESTINATION LIST to create one

 

 

 

  • Just like the CAMPAIGN of course you need to name the DESTINATION LIST to easily identify it.

 

 

 

 

The purpose of the names is to identify  where to repost the content

 

  • To start, go to SOCIAL PROFILES and select from the newly warmed up avatars

[Given that you already chose an avatar]

 

  • You have to name the avatar the destination lists’ name that you did

EXAMPLE : the CAMPAIGN and DESTINATION LISTS’ name is FEMALE 22 so you also need to put FEMALE 22 on the AVATARS’ name (SEE PHOTO)

 

 

 

 

  • Go back to DESTINATION LIST

 

 

 

 

  • Then look for the DESTINATION LISTS’ name that you created, then click 

 

  • Go to filter, type the name and DON’T FORGET to CHECK the boxes

 

 

  • Next, go to CAMPAIGN

 

  • Once you click campaign, look for the campaign’s name and click

  • Then go to WHERE TO PUBLISH

 

  • Then you will be directed here after clicking the Destination list. Make sure that the box has a check mark 

 

  • Click WHERE TO PUBLISH and FOLLOW the settings on the picture

 

  • For your information, all of the scraped photos/post will be placed here in the POSTLIST

 

IMPORTANT NOTE: Make sure to review everything afterwards.

 

How to do Reposting for Avatars

 

  • First is to check what account you’ll going to do reposting

  • Then you need to get the LINK of the account that you will do reposting (meaning the link of the account that you’ll get pictures/posts with)
    [ Note: You don’t need to copy the whole link, just the USERNAME ]

  • You go to SOCIAL PROFILES and look for the tag SCRAPERS

 

This will be the time that we will use the scrapers we imported earlier

 

  • Choose a scraper and click it to open

 

  • Once you already click it, you have to name the scraper to avoid confusion and to easily identify it.

 

  • After putting a name, you go to tools

 

  • Then go to REPOST

 

  • Next is you need to go to SETTINGS first, then copy the settings on the picture

 

  • Scroll down and click ONLY the IMAGE 

 

  • Make sure to click the box (see picture) and look for the CAMPAIGN NAME that you created

 

 

 

  • Scroll down and keep in mind to REMOVE THE TEXT IN THE BOX

 

 

 

 

 

  • Next, go to SOURCES (right next to settings)

  • Follow the instructions on the picture


Note: AGAIN, you only need the USERNAME of the account that you use for reposting not the whole link .

 

 

  • After that, you need to go back to the settings and toggle START you run the reposting.

 

 

 

 

This is how it looks like

 

 

So to check if it is really running ..

  • Go to CAMPAIGN

  • Look for the name of the campaign

  • Go to POST LIST

 

And as you can see there are two pictures, meaning it is running (more pictures will be added on the post list as time goes by)

 

Before you can call it for automation you also need to add PROFILE PICTURES to the AVATARS/ACCOUNT that you warmed up 

 

So to add .. 

 

  • Select one photo in the post list

  • Screenshot it

  • Go to an editor like CANVA or any editor you prefer

  • Save it in the server

  • Go to the avatar/account

 

 

  • Go to EDIT PROFILE

  • And click CHANGE PROFILE PICTURE

 

 

  • Select the PROFILE PICTURE that you edited

  • Then SAVE

 

Lastly, you need to buy FOLLOWERS, LIKES and COMMENTS for your account

 

Followers – you choose/select a trusted site where you can buy followers

Likes – you choose/select a trusted site where you can buy likes FOR YOUR SCRAPED IMAGES

Comments – you choose/select a trusted site where you can buy comments for your photos [ it depends on you on what kind of comments you wish to put, comments can be random or custom ]


We can recommend https://followiz.com/ in buying your followers, likes and comments. They also offer not just Instagram services but also others like Facebook, LinkedIn etc.

 

NOTE: It is important to buy initial followers, likes and comments for your account to look like a real account and establish credibility with Instagram.

 

AND THERE YOU FINALLY HAVE IT. Your account is good to go and ready for automation.